https://hiomakivi.fi/en/new-products EN Hiomakivi.fi, new products info@hiomakivi.fi info@hiomakivi.fi If you want more feel and feedback in your sharpening, this set was made for you. A sharpening set built on feel Tanaka Toishi is a series from a Kyoto-based maker with deep roots in natural stones – and it shows. These synthetic stones don't feel hard and clinical; instead, they have a clear liveli... https://hiomakivi.fi/en/p37552/tanaka-toishi-michibiki-pack Tanaka TOISHI WA #150 Michibiki is a traditional Japanese water whetstone from Kyoto. It is a soaking stone that requires approximately 10–15 minutes of soaking before use. The #150 grit belongs to the extra coarse category and is intended for situations where the edge requires clear correctio... https://hiomakivi.fi/en/p37551/tanaka-toishi-wa-150 Tanaka TOISHI WA #320 Michibiki is a traditional Japanese water whetstone from Kyoto. It is a soaking stone that requires approximately 10–15 minutes of soaking before use. The #320 grit belongs to the coarse category and is intended for situations where the edge requires clear correction. At this l... https://hiomakivi.fi/en/p37550/tanaka-toishi-wa-320 Tanaka TOISHI WA #3000 Michibiki is a traditional Japanese water whetstone from Kyoto. It is a soaking stone that requires approximately 10–15 minutes of soaking before use. Product dimensions may vary slightly. I measured two stones, and both were as follows: Grit: #3000 Length: 218 mm Width: 85 m... https://hiomakivi.fi/en/p37549/tanaka-toishi-wa-3000 Tanaka TOISHI GC #1000 Michibiki is a traditional Japanese water whetstone from Kyoto. It is a soaking stone that requires approximately 10–15 minutes of soaking before use. GC (Green) refers to the abrasive material used in the stone, which is silicon carbide. In practice, this means more agg... https://hiomakivi.fi/en/p37548/tanaka-toishi-gc-1000 Tanaka TOISHI WA #1000 Michibiki is a traditional Japanese water whetstone from Kyoto. It is a soaking stone that requires approximately 10–15 minutes of soaking before use. The stone is designed for users who value efficient material removal, good feedback, and controlled sharpening. It cuts evenl... https://hiomakivi.fi/en/p37547/tanaka-toishi-wa-1000 Angle guide 15° / 20° – a simple tool to answer the question: what does 15° actually look like? This model features the two most commonly used angles: 15° and 20°. Place the guide under the knife edge on the whetstone, and you will immediately see what the correct angle looks like. Once your eye le... https://hiomakivi.fi/en/p37546/angle-guide-15-20 EXTREM S30 – Finishing (approx. 0.5 micron) is the finishing compound of the range, delivering an exceptionally high gloss and a mirror-like surface finish. The EXTREM range is based on the CERAX® abrasive, a unique combination of ceramic and diamond components developed by MERARD. This combination ... https://hiomakivi.fi/en/p37544/extrem-pasta-s30-finishing EXTREM S20 – Polishing (approx. 3 micron) is the actual polishing compound that smooths the surface and brings out a clear, bright shine before the finishing stage. The EXTREM range is based on the CERAX® abrasive, a unique combination of ceramic and diamond components developed by MERARD. This comb... https://hiomakivi.fi/en/p37543/extrem-pasta-s20-polishing EXTREM S10 – Preparation (approx. 6 micron) is a preparation-stage polishing compound. It is designed for fast and efficient material removal before the actual polishing process. The EXTREM range is based on the CERAX® abrasive, a unique combination of ceramic and diamond components developed by MER... https://hiomakivi.fi/en/p37542/extrem-pasta-s10-preparation Grit: Yellow 0.5 micron Length: 80 mm Diameter: approx. 30 mm Weight: 100 g Dimensions may vary; average weight per piece is 100 g. https://hiomakivi.fi/en/p37541/luxor-polishing-paste-yellow-0-5-micron Parker Asahi Black Pro cutting board has arrived in our warehouse and is now available. You could almost say a little stardust has been mixed into this board – it has quickly become one of the most talked-about cutting boards in modern kitchens. The elegant black color makes it a striking and stylis... https://hiomakivi.fi/en/p37540/parker-asahi-black-pro-380x210x13 Please note that the surface of Haidu stones has a slightly rougher layer caused by the manufacturing process, which can be easily removed with a flattening stone. Since the stones are entirely handmade, small chips or imperfections on the edges may occur – these do not affect the performance of ... https://hiomakivi.fi/en/p37538/haidu-hva-1000 This package includes the most popular grits, 1000 and 3000. The set also gives you the option to purchase a stand and a flattening stone at a discounted price. Flattening Rockstar stones is slightly more challenging than with traditional softer stones, but it can still be done well with a basic Sue... https://hiomakivi.fi/en/p37537/shapton-rockstar-pack https://hiomakivi.fi/en/p37536/nesmuk-exklusiv-c90-140-desert-ironwood https://hiomakivi.fi/en/p37535/nesmuk-soul-chef-180-desert-ironwood https://hiomakivi.fi/en/p37534/nesmuk-soul-chef-140-desert-ironwood https://hiomakivi.fi/en/p37533/nesmuk-nahkasuoja-chef-180 https://hiomakivi.fi/en/p37532/nesmuk-nahkasuoja-chef-140 Please note that the surface of Haidu stones has a slightly rougher layer caused by the manufacturing process, which can be easily removed with a flattening stone. Since the stones are entirely handmade, small chips or imperfections on the edges may occur – these do not affect the performance of ... https://hiomakivi.fi/en/p37529/haidu-hva-8000 Please note that the surface of Haidu stones has a slightly rougher layer caused by the manufacturing process, which can be easily removed with a flattening stone. Since the stones are entirely handmade, small chips or imperfections on the edges may occur – these do not affect the performance of ... https://hiomakivi.fi/en/p37528/haidu-hva-3000 Please note that the surface of Haidu stones has a slightly rougher layer caused by the manufacturing process, which can be easily removed with a flattening stone. Since the stones are entirely handmade, small chips or imperfections on the edges may occur – these do not affect the performance of ... https://hiomakivi.fi/en/p37527/haidu-hva-600 Please note that the surface of Haidu stones has a slightly rougher layer caused by the manufacturing process, which can be easily removed with a flattening stone. Since the stones are entirely handmade, small chips or imperfections on the edges may occur – these do not affect the performance of ... https://hiomakivi.fi/en/p37526/haidu-hva-250 The result of our product development is a leather strop with a surface that is nearly perfect for diamond emulsions and Luxor pastes. The final solution was achieved through trial and error. We selected Grade 1 leather approximately 4 mm thick. The shiny and hard surface layer was sanded off,... https://hiomakivi.fi/en/p37524/hiomakivi-strop-leather-strop-board-210x75-special-v4 The so-called consumer version of Asahi differs slightly from the Asahi Pro board. The synthetic matte rubber is a tad softer, retaining the same top-notch cutting feel. The board doesn't absorb color, and the surface can be rejuvenated hundreds of times with sandpaper. Comment from Hiomakiv... https://hiomakivi.fi/en/p37522/parker-asahi-black-square-250x250x8 Hiokami PM8O – 67 Layers Damascus Steel The Hiokami PM8O represents Damascus steel at its finest. The blade is crafted from 67 layers of Damascus steel with a 10Cr15CoMoV core. With a hardness of 60 ±1 HRC, durability and edge retention are ensured through vacuum heat treatment and deep freeze proce... https://hiomakivi.fi/en/p37521/hiokami-pm8o-utility Hiokami B20 – 67 Layers Damascus Steel The Hiokami B20 series represents modern Damascus steel at its best. The blade is made of 67 layers of Damascus steel with a 10Cr15CoMoV steel core. With a hardness of 60 ±1 HRC, its durability and edge retention are achieved through vacuum heat treatment... https://hiomakivi.fi/en/p37520/hiokami-b20-paring Hiokami B20 – 67 Layers Damascus SteelThe Hiokami B20 series represents modern Damascus steel at its best. The blade is made of 67 layers of Damascus steel with a 10Cr15CoMoV steel core. With a hardness of 60 ±1 HRC, its durability and edge retention are achieved through vacuum heat treatment and de... https://hiomakivi.fi/en/p37519/hiokami-b20-utility Hiokami B20 – 67 Layers Damascus Steel The Hiokami B20 series represents modern Damascus steel at its finest. The blade is crafted from 67-layer Damascus Steel with a 10Cr15CoMoV steel core. With a hardness of 60 ±1 HRC, its durability and edge retention are ensured through vacuum heat treatme... https://hiomakivi.fi/en/p37518/hiokami-b20-santoku Hiokami B20 – 67 Layers Damascus SteelThe Hiokami B20 series represents modern Damascus steel at its finest. The blade is crafted from 67-layer Damascus Steel with a 10Cr15CoMoV steel core. With a hardness of 60 ±1 HRC, its durability and edge retention are ensured through vacuum heat treatment and ... https://hiomakivi.fi/en/p37517/hiokami-b20-chef Hakuto Series: Grits from 1500 to 10000 are suitable for finishing all types of metals. Grit: #6000 Length: 200 mm Width: 75 mm Thickness: 26 mm – diamond layer thickness approx. 4 mm https://hiomakivi.fi/en/p37512/nsk-kogyo-hakuto-6000 Hakuto Series: Grits from 1500 to 10000 are suitable for finishing all types of metals. Grit: #3000 Length: 200 mm Width: 75 mm Thickness: 26 mm – diamond layer thickness approx. 4 mm https://hiomakivi.fi/en/p37511/nsk-kogyo-hakuto-3000 Hakuto Series: Grits from 1500 to 10000 are suitable for finishing all types of metals. Grit: #1500 Length: 200 mm Width: 75 mm Thickness: 26 mm – diamond layer thickness approx. 4 mm https://hiomakivi.fi/en/p37510/nsk-kogyo-hakuto-1500 Hakuto Series: Designed for all steels except carbon and semi-stainless. An excellent choice for hard, modern steels such as stainless powder steels and various tool and knife steels that do not belong to traditional Japanese carbon steel categories. Grit: #800 Length: 200 mm Width: 75 mm Thickness... https://hiomakivi.fi/en/p37509/nsk-kogyo-hakuto-800 Hakuto Series: Designed for all steels except carbon and semi-stainless. An excellent choice for hard, modern steels such as stainless powder steels and various tool and knife steels that do not belong to traditional Japanese carbon steel categories. Grit: #400 Length: 200 mm Width: 75 mm Thickness... https://hiomakivi.fi/en/p37508/nsk-kogyo-hakuto-400 Hakuto Series: Designed for all steels except carbon and semi-stainless. An excellent choice for hard, modern steels such as stainless powder steels and various tool and knife steels that do not belong to traditional Japanese carbon steel categories. Grit: #200 Length: 200 mm Width: 75 mm Thickness... https://hiomakivi.fi/en/p37507/nsk-kogyo-hakuto-200 Stylish walnut magnetic knife holder. A highly efficient and practical solution for the kitchen. Includes mounting screws and double-sided tape – all fixings are completely hidden. Space for approximately 5–6 knives. Knife shown in the photo is not included. Manufacturer: Ryda Knives Region:... https://hiomakivi.fi/en/p37506/ryda-knives-walnut-magnetic-knife-holder Manufacturer: Ryda Knives Origin: Sweden, China, France Type: Utility Blade length: 127 mm Blade height: 27 mm Blade thickness: 2.2 mm Overall length:  252 mm Weight: 78 g Hardness: 63 HRC Steel: 73-layer high-carbon san mai Damascus (316/316L & ST650 powder steel) Edge a... https://hiomakivi.fi/en/p37504/ryda-knives-utility-a-73 Manufacturer: Ryda Knives Origin: Sweden, China, France Type: Chef’s knife Blade length: 205 mm Blade height: 52 mm Blade thickness: 2.2 mm Overall length: 340 mm Weight: 198 g Hardness: 63 HRC Steel: 73-layer high-carbon san mai Damascus (316/316L & ST650 powder steel) Edge a... https://hiomakivi.fi/en/p37503/ryda-knives-chef-a-73 I made a larger batch of cutting boards in the size 330 × 250 mm for one customer. The size turned out to be so practical that I made one for our cottage as well – and now a couple of other customers have requested the same. So, I decided to produce a small series for sale. This board is cut f... https://hiomakivi.fi/en/p37502/parker-asahi-black-pro-330x250x15 Naniwa Gouken stones combine thoughtful design with practical use: 20 mm thick stone with one rounded edge – perfect for sharpening tools like opening knives. The opposite side features a gently concave edge, making this a versatile tool for sharpening garden tools and other curved blades. Many have... https://hiomakivi.fi/en/gouken-pack Naniwa Gouken 220 is an extra coarse shaped stone for efficient grinding. The rounded and concave edges are ideal for opening knives and curved blades. Perfect when fast material removal is needed. Grit:   #220 Long:   133 mm Wide:   28 mm Thick:   20 mm ... https://hiomakivi.fi/en/p37500/naniwa-gouken-220 Naniwa Gouken 3000: A silky-smooth finishing stone that leaves a fine and precise edge. An excellent choice for bringing curved blades to top condition. Grit:   #3000 Long:   133 mm Wide:   28 mm Thick:   20 mm NOTE! This whetstone is a so-called se... https://hiomakivi.fi/en/p37499/naniwa-gouken-3000 Naniwa Gouken 1000 is a comfortable-feeling sharpening stone for regular edge maintenance. Works great on its own or as part of the Gouken set. The rounded shapes make sharpening smooth and easy, even for curved blades. Grit:   #1000 Long:   133 mm Wide:   28 mm Th... https://hiomakivi.fi/en/p37498/naniwa-gouken-1000 Parker Asahi Black Pro 750×330×15 is an extra-large rubber cutting board designed for situations where generous workspace is essential. With an impressive 75 cm width, it offers plenty of room for preparing large vegetables, filleting fish or working with multiple ingredients at once. The Asahi Bla... https://hiomakivi.fi/en/p37497/parker-asahi-black-pro-750x330x15 Parker Asahi Black Pro 600×330×15 is a professional-grade rubber cutting board that offers generous workspace for demanding kitchen tasks. The 33 cm depth is especially practical when working with larger ingredients such as cabbage, meat or fish. The Asahi Black Pro does not contain plastic. The bo... https://hiomakivi.fi/en/p37496/parker-asahi-black-pro-600x330x15 Parker Asahi Black Pro is a professional-grade rubber cutting board designed especially for high-quality kitchen knives and demanding use. This board does not contain plastic. Its structure is based on a combination of synthetic rubber and wood fiber, making it both strong, flexible and extremely d... https://hiomakivi.fi/en/p37495/parker-asahi-black-pro-500x330x15 Hiokami PM8O – Lightweight Chef’s Knife, 67 Layers Damascus Steel The Hiokami PM8O represents modern Damascus steel at its finest. The blade is crafted from 67 layers of Damascus Steel with a 10Cr15CoMoV steel core. With a hardness of 60 ±1 HRC, its durability and edge retention are ensured th... https://hiomakivi.fi/en/p37493/hiokami-pm8o-chef Hiokami PM8O – Lightweight Santoku, 67 Layers Damascus Steel The Hiokami PM8O represents Damascus steel at its finest. The blade is crafted from 67 layers of Damascus steel with a 10Cr15CoMoV core. With a hardness of 60 ±1 HRC, durability and edge retention are ensured through vacuum heat trea... https://hiomakivi.fi/en/p37492/hiokami-pm8o-santoku This Sink Bridge is designed to make knife sharpening over the sink easier. It provides a stable and ergonomic workspace, ensuring a smoother and safer sharpening experience. 🔹 Made in Finland – All materials are sourced from the EU, guaranteeing high quality and responsible production. 🔹... https://hiomakivi.fi/en/sink-bridge The stones we sell come with the metal storage box shown in the picture. Grit: #8000 Long: 210 mm Wide: 70 mm Thick: 10 mm NOTE! "Splash-and-Go" stones do not tolerate prolonged storage in water. Use water only as much as the stone requires. Do not submerge the stones in a water b... https://hiomakivi.fi/en/p37491/shapton-rockstar-8000 The stones we sell come with the metal storage box shown in the picture. Grit: #2000 Long: 210 mm Wide: 70 mm Thick: 10 mm NOTE! "Splash-and-Go" stones do not tolerate prolonged storage in water. Use water only as much as the stone requires. Do not submerge the stones in a water b... https://hiomakivi.fi/en/p37490/shapton-rockstar-2000 The stones we sell come with the metal storage box shown in the picture. Grit: #4000 Long: 210 mm Wide: 70 mm Thick: 10 mm NOTE! "Splash-and-Go" stones do not tolerate prolonged storage in water. Use water only as much as the stone requires. Do not submerge the stones in a water b... https://hiomakivi.fi/en/p37489/shapton-rockstar-4000 Grit: Hakuto 1,  #800 Long:   40 mm Wide:   18 mm Thick:   15 mm https://hiomakivi.fi/en/p37487/nsk-kogyo-diamond-nagura-800 Parker Asahi Black Pro is a professional-grade rubber cutting board designed especially for high-quality kitchen knives and demanding use. This larger 600 mm version offers generous workspace for both professional kitchens and home cooks. The board does not contain plastic. Its structure is based o... https://hiomakivi.fi/en/p37486/parker-asahi-black-pro-600x300x20 Parker Asahi Black Pro 750×330×20 is an extra-large rubber cutting board designed for demanding kitchen work. With an impressive 75 cm width, it provides plenty of workspace for handling large vegetables, filleting fish or preparing multiple ingredients at the same time. The Asahi Black Pro does no... https://hiomakivi.fi/en/p37485/parker-asahi-black-pro-750x330x20 The stones are entirely handmade by an artisan. The dimensions given may vary somewhat. Grit: #6000 Long: 205 mm Wide: 75 mm Thick: 26 mm Difference Between KEN-SYOU Akatsuki and Kei Series Both the Akatsuki and Kei series sharpening stones from KEN-SYOU are made using a resinoid... https://hiomakivi.fi/en/p37484/ken-syou-akatsuki-6000 The stones are entirely handmade by an artisan. The dimensions given may vary somewhat.Grit: #3000Long: 205 mmWide: 75 mmThick: 26 mm Difference Between KEN-SYOU Akatsuki and Kei Series Both the Akatsuki and Kei series sharpening stones from KEN-SYOU are made using a resinoid bonding method, but the... https://hiomakivi.fi/en/p37483/ken-syou-akatsuki-3000 The result of our product development is a leather strop with a surface that is nearly perfect for diamond emulsions and Luxor pastes. The final solution was achieved through trial and error. We selected Grade 1 leather approximately 4 mm thick. The shiny and hard surface layer was sanded off,... https://hiomakivi.fi/en/p37478/hiomakivi-strop-leather-strop-board-300x75-special-v4 Global G-2 Chef’s Knife – Traditional Design and Precise Sharpness The Global G-2 chef’s knife combines traditional design with top-quality Japanese craftsmanship, offering a precise blade and durable performance for all kitchen tasks. The G-2 knife is forged from a single piece of high-qua... https://hiomakivi.fi/en/p37477/global-g-2-kokkiveitsi Global G-57 Santoku – Versatile Precision and Japanese Quality The Global G-57 Santoku knife combines traditional Japanese knife design with Global’s high-tech engineering, offering versatility, precision, and durability for all cutting tasks in the kitchen. The G-57 knife is crafted from a... https://hiomakivi.fi/en/p37476/global-g-57-santoku Global SAI-03 Knife – Top-Level Ergonomics and Superior Sharpness The Global SAI-03 combines sleek design with advanced technology, offering modern ergonomics, a razor-sharp blade, and unmatched comfort in use. Hiomakivi's store owner shares The basic Global G series is very familiar to ... https://hiomakivi.fi/en/p37475/global-sai-03-santoku After many inquiries, we finally have the Ken-syou designed diamond flattening plate available for sale! This plate is manufactured by the same factory that produces the popular Atoma diamond stones, and its pattern is inspired by Ken-syou's specifications. The product is marketed under their bra... https://hiomakivi.fi/en/p37474/ken-syou-diamond-flattening-plate-400 Manufacturer: Ryda Knives Region: Sweden, Japan, USA Type: Nakiri Blade length:  180 mm Blade height: 50 mm Blade thickness: 2,0 mm Overall length: 315 mm Weight: 180 g Hardness:  60 HRC Steel: 3 layers high carbon damascus steel (316/316l & Aus-10 steel) Angle: 15 d... https://hiomakivi.fi/en/p37472/ryda-knives-nakiri-a-30 Manufacturer: Ryda Knives Region: Sweden, Japan, USA Type: Carving Blade length:  205 mm Blade height: 35 mm Blade thickness: 2,0 mm Overall length: 340 mm Weight: 150 g Hardness:  60 HRC Steel: 3 layers high carbon damascus steel (316/316l & Aus-10 steel) Angle: 15 ... https://hiomakivi.fi/en/p37471/ryda-knives-carving-a-30 Watch the video below to see how important this tool is when working with NSK Kogyo stones. This stone is a #120 grit SiC-based resurfacing stone, which is best suited for conditioning Koqyo diamond stones under 1500 grit. Grit:   #120 Long:   210 mm Wide:   ... https://hiomakivi.fi/en/p37470/nsk-kogyo-resurfacer-large Watch the video below to see how important this tool is when working with coarse NSK Kogyo stones. This stone is a #120 grit SiC-based lapping stone, which is best suited for 200 grit diamonds but also works with 400 grit Oboro Knife diamonds. Grit:   #120 Long:   130 mm ... https://hiomakivi.fi/en/p37469/nsk-kogyo-resurfacer-small Oboro Series: Grits from 1500 to 10000 are suitable for finishing all types of metals. Grit: #4000 Length: 200 mm Width: 75 mm Thickness: 26 mm – diamond layer thickness approx. 4 mm https://hiomakivi.fi/en/p37467/nsk-kogyo-oboro-knife-4000 Oboro Series: Grits from 1500 to 10000 are suitable for finishing all types of metals. Grit: #2000 Length: 200 mm Width: 75 mm Thickness: 26 mm – diamond layer thickness approx. 4 mm https://hiomakivi.fi/en/p37466/nsk-kogyo-oboro-knife-2000 Oboro Series: Specifically designed for carbon steels, semi-stainless steels, and traditional Japanese steels such as White #1, White #2, and Blue Steel series. Grit: #800 Length: 200 mm Width: 75 mm Thickness: 26 mm – diamond layer thickness approx. 4 mm This product benefits greatly from this ac... https://hiomakivi.fi/en/p37465/nsk-kogyo-oboro-knife-800 Oboro Series: Specifically designed for carbon steels, semi-stainless steels, and traditional Japanese steels such as White #1, White #2, and Blue Steel series. Grit: #400 Length: 200 mm Width: 75 mm Thickness: 26 mm – diamond layer thickness approx. 4 mm This product benefits greatly from this ac... https://hiomakivi.fi/en/p37464/nsk-kogyo-oboro-knife-400 Naniwa Standard Package – Everything You Need for Knife Sharpening This package brings together the high-quality Naniwa Standard series stones: 220, 1000 and 4000. It also includes a Suehiro flattening stone (280) and a sturdy Naniwa stone holder. Japanese quality at a reasonable price – th... https://hiomakivi.fi/en/standard-pack This stone is a double-sided Naniwa Advanced stone Combo. Both grits are 10mm thick, making the total thickness of the stone 20mm. Grit:   #5000/10000 Long:   210 mm Wide:   70 mm Thick:   20 mm NOTE! "Splash-and-Go" stones do not tolerate prolonged storage in water. Use water... https://hiomakivi.fi/en/p37458/naniwa-combination-stone-5000-10000 Grit:   #4000 Long:   210 mm Wide:   70 mm Thick:   20 mm NOTE! "Splash-and-Go" stones do not tolerate prolonged storage in water. Use water only as much as the stone requires. Do not submerge the stones in a water basin. After sharpening, immediately wipe the s... https://hiomakivi.fi/en/p37457/naniwa-standard-4000 Naniwa Aotoishi  Grit:   #2000 Long:   210 mm Wide:   70 mm Thick:   20 mm NOTE! "Splash-and-Go" stones do not tolerate prolonged storage in water. Use water only as much as the stone requires. Do not submerge the stones in a water basin. After sharpening, ... https://hiomakivi.fi/en/p37456/naniwa-standard-2000 Grit:   #1000 Long:   210 mm Wide:   70 mm Thick:   20 mm NOTE! This whetstone is a so-called soaking stone. It works best after 20-30 minutes of soaking. After sharpening, immediately wipe the stone clean with a towel. This will give the stone a clean look and ... https://hiomakivi.fi/en/p37455/naniwa-standard-1000 Naniwa's Arato is a powerful stone that is also freely referred to as Pink Brick, although this name originally belongs to Imanishi's Arato stone. Grit:   #220 Long:   210 mm Wide:   70 mm Thick:   20 mm NOTE! This whetstone is a so-called soak... https://hiomakivi.fi/en/p37454/naniwa-standard-220 The Tsushima Nagura natural whetstone is an excellent choice even for beginners looking to explore Japanese natural stones (JNAT). The stone comes from Tsushima Island, located off the western coast of Japan, known for its high-quality sharpening stones. Interesting fact This stone is qua... https://hiomakivi.fi/en/p37453/tsushima-nagura Grit: Hakuto 2,  #3000 Long:   40 mm Wide:   18 mm Thick:   15 mm https://hiomakivi.fi/en/p37450/nsk-kogyo-diamond-nagura-3000 Grit: Hakuto 1,  #400 Long:   40 mm Wide:   18 mm Thick:   15 mm https://hiomakivi.fi/en/p37449/nsk-kogyo-diamond-nagura-400 Best for flattening 400 to 1500 stones  Grit:   #400 Long:   200 mm Wide:   75 mm Thick:   18 mm https://hiomakivi.fi/en/p37447/nsk-kogyo-flattening-stone-400 The reliable 6000-grit stone from Minosharp. Grit: #6000Length:  210 mmWidth:  70 mmThickness:  21–22 mm https://hiomakivi.fi/en/minosharp-beige-super-6000 The Minosharp 1000 is a semi-soaking and very efficient whetstone. It’s not dull or unresponsive – it reveals its character right from the start. The MinoSharp 1000 is easy to use, and you’ll feel its bite from the very first strokes. It also works well with more demanding steels. The whetst... https://hiomakivi.fi/en/minosharp-brown-medium-1000 The coarsest Minosharp stone, #240, has proven to be an exceptionally effective choice for demanding repair sharpening. While many coarse stones tend to be soft and wear quickly, the Minosharp 240 stands out: it is slightly harder, allowing for more efficient and consistent work even on larger ta... https://hiomakivi.fi/en/minosharp-green-rough-240 Jende Poly Diamond Emulsion 0.5 Micron, 25 ml bottle0.5 microns corresponds to approximately 30000 grit. The highest quality emulsion on the market for knife stropping. Fast-cutting poly diamond abrasives Diamond emulsions work on all types of steel, including ceramic materials 25 ml (1 oz) pump bo... https://hiomakivi.fi/en/p37434/jende-diamond-emulsion-0-5-micron-25ml Jende Poly Diamond Emulsion 1 Micron, 25 ml bottle1 microns corresponds to approximately 16000 grit. The highest quality emulsion on the market for knife stropping. Fast-cutting poly diamond abrasives Diamond emulsions work on all types of steel, including ceramic materials 25 ml (1 oz) pump bottle... https://hiomakivi.fi/en/p37433/jende-diamond-emulsion-1-micron-25ml Jende Poly Diamond Emulsion 2 Micron, 25 ml bottle2 microns corresponds to approximately 8000 grit. The highest quality emulsion on the market for knife stropping. Fast-cutting poly diamond abrasives Diamond emulsions work on all types of steel, including ceramic materials 25 ml (1 oz) pump bottle ... https://hiomakivi.fi/en/p37432/jende-diamond-emulsion-2-micron-25ml Jende Poly Diamond Emulsion 4 Micron, 25 ml bottle4 microns corresponds to approximately 4000 grit. The highest quality emulsion on the market for knife stropping. Fast-cutting poly diamond abrasives Diamond emulsions work on all types of steel, including ceramic materials 25 ml (1 oz) pump bottle ... https://hiomakivi.fi/en/p37431/jende-diamond-emulsion-4-micron-25ml The so-called consumer version of Asahi differs slightly from the Asahi Pro board. The synthetic matte rubber is a tad softer, retaining the same top-notch cutting feel. The board doesn't absorb color, and the surface can be rejuvenated hundreds of times with sandpaper. Comment from Hiomakiv... https://hiomakivi.fi/en/p37429/parker-asahi-black-s-255x175x8 The so-called consumer version of Asahi differs slightly from the Asahi Pro board. The synthetic matte rubber is a tad softer, retaining the same top-notch cutting feel. The board doesn't absorb color, and the surface can be rejuvenated hundreds of times with sandpaper. Comment from Hiomakiv... https://hiomakivi.fi/en/p37428/parker-asahi-black-m-300x200x8 The so-called consumer version of Asahi differs slightly from the Asahi Pro board. The synthetic matte rubber is a tad softer, retaining the same top-notch cutting feel. The board doesn't absorb color, and the surface can be rejuvenated hundreds of times with sandpaper. Comment from Hiomakivi.fi en... https://hiomakivi.fi/en/p37427/parker-asahi-black-l-370x245x8 The stones we sell come with the metal storage box shown in the picture. Grit: #6000 Long: 210 mm Wide: 70 mm Thick: 10 mm NOTE! "Splash-and-Go" stones do not tolerate prolonged storage in water. Use water only as much as the stone requires. Do not submerge the stones in a water b... https://hiomakivi.fi/en/p37423/shapton-rockstar-6000 The stones we sell come with the metal storage box shown in the picture. Grit: #3000 Long: 210 mm Wide: 70 mm Thick: 10 mm NOTE! "Splash-and-Go" stones do not tolerate prolonged storage in water. Use water only as much as the stone requires. Do not submerge the stones in a water b... https://hiomakivi.fi/en/p37422/shapton-rockstar-3000 The stones we sell come with the metal storage box shown in the picture. Grit: #1000 Long: 210 mm Wide: 70 mm Thick: 10 mm NOTE! "Splash-and-Go" stones do not tolerate prolonged storage in water. Use water only as much as the stone requires. Do not submerge the stones in a water b... https://hiomakivi.fi/en/p37421/shapton-rockstar-1000 The stones we sell come with the metal storage box shown in the picture. Grit: #500 Long: 210 mm Wide: 70 mm Thick: 10 mm NOTE! "Splash-and-Go" stones do not tolerate prolonged storage in water. Use water only as much as the stone requires. Do not submerge the stones in a water ba... https://hiomakivi.fi/en/p37420/shapton-rockstar-500 The stones we sell come with the metal storage box shown in the picture. Grit: #320  Long: 210 mm Wide: 70 mm Thick: 10 mm NOTE! "Splash-and-Go" stones do not tolerate prolonged storage in water. Use water only as much as the stone requires. Do not submerge the stones in a wa... https://hiomakivi.fi/en/p37419/shapton-rockstar-320 High-quality Japanese combination stone IMANISHI Combo 1000/6000 and an effective SUEHIRO Flattening Stone #280 in one package. This set is designed especially for beginners who want a truly working solution for whetstone sharpening – without compromises. The sharpening stone in this package is the ... https://hiomakivi.fi/en/imanishi-combo-1000-6000-pack Now available: the Naniwa plastic storage box, made in Japan. Designed primarily for storing whetstones, it also functions reasonably well as a holder during sharpening. The ventilation holes on one side allow moisture to escape, helping the stone inside to dry safely. Compatibility: fits stones up ... https://hiomakivi.fi/en/p37414/naniwa-plastic-storage-box-for-whetstone Luxor grey polishing compound is suitable for finishing knife steels and stainless steels after the green compound. It also works well for polishing gold, platinum, and silver. Grit: Grey 1.0 micron Length: 80 mm Diameter: approx. 30 mm Weight: 100 g Dimensions may vary; average weight p... https://hiomakivi.fi/en/p37412/luxor-polishing-paste-grey-1-0-micron Really fast, hard, large, and also heavy stone. Immerse the stone for at least 15-20 minutes, i.e., practically until the bubbles stop rising.  “This is one of the best soaking stones around 400 grits” - WZ 400 feels different compared to my own favorite Naniwa Pro 400, but WZ is fast and mig... https://hiomakivi.fi/en/p37411/imanishi-wz-400-marble