HAIDU HVA 600

Please note that the surface of Haidu stones has a slightly rougher layer caused by the manufacturing process, which can be easily removed with a flattening stone. Since the stones are entirely handmade, small chips or imperfections on the edges may occur – these do not affect the performance of the stone in any way.

The dimensions of the stone may vary slightly, so the listed size is approximate.

Grit: #600
Length: 210 mm
Width: 70 mm
Thickness: 10 mm

NOTE!

This whetstone is a so-called semi-soaking stone. It works best after 5-10 minutes of soaking. Do not store the stone in a basin of water. After sharpening, immediately wipe the stone clean with a towel. This will give the stone a clean look and start the drying process. Place the stone to dry in a position where it does not touch a solid surface. For example, place the stone on top of a pencil. Allow the stone to dry slowly, without additional heating. Do not place the stone in direct sunlight. Do not allow the stone to freeze when wet. It takes more than 24 hours to dry. Store the stone protected from dents, for example, in its box.