HAIDU Sharpening rod 6000

This slightly unusual ceramic rod has been a highly sought-after product — and after some availability issues, it’s finally back in stock!

The Haidu HCDW 6000 is perfect for fine edge finishing or for removing burrs with a rod. It’s an excellent tool for maintaining your knife’s sharpness and keeping it in top condition.

Please note that this is a plain rod without a handle – and none is needed for this design.
In true Haidu style, we recommend soaking the rod in water for a few minutes before the first use and lightly rubbing the surface with sandpaper, a scouring pad, or any slightly abrasive material. This reveals the natural grit beneath and ensures optimal sharpening performance.

Grit: #6000
Long: 365 mm
Thick: 15 mm 

NOTE!

This whetstone is a so-called semi-soaking stone. It works best after 5-10 minutes of soaking. Do not store the stone in a basin of water. After sharpening, immediately wipe the stone clean with a towel. This will give the stone a clean look and start the drying process. Place the stone to dry in a position where it does not touch a solid surface. For example, place the stone on top of a pencil. Allow the stone to dry slowly, without additional heating. Do not place the stone in direct sunlight. Do not allow the stone to freeze when wet. It takes more than 24 hours to dry. Store the stone protected from dents, for example, in its box.